Features and advantages
- Suitable for high flow rates and low VOC concentrations
- Adsorbent fireproof material
- Reduced pressure drops
- Pollutants and stream concentration ratio up to 1:20
- High purification efficiency >95%
- Easy to manage and use
- Reduced maintenance
- Electrical switchgear with PLC and remote assistance
In rotor concentration technology, the pollution absorption process is carried out by a concentration rotor containing zeolites which continuously guarantees the adsorption and simultaneous regeneration of part of the rotor. This way there is no need for consecutive phases for the adsorption, regeneration and cooling of the adsorbent material which distinguishes similar processes, but carried out with a fixed bed system.
The air to be purified is conveyed by specific fans to the adsorption section of the concentration rotor where the pollutant, passing through zeolites, is captured thanks to the configuration of chemical-physical bonds and the adsorbent material. The impurity-free air is sent to the final exhaust stack.
Afterwards, through the heating of a particular section of the rotor, the pollutant adsorbed by the original emission, is released in a second stream with a much lower flow rate.
This concentrated stream is sent to a thermal oxidation process which, based on the specific technical characteristics, can either be recuperative, catalytic or regenerative. Choosing the correct final oxidation system achieves self-sufficiency, drastically reducing auxiliary fuel consumption.
It is essential to dedicate special attention to the required filtering of the effluent. It must be carried out before the adsorption phase and avoid clogging and reducing the adsorbent capacity of the concentration rotor. Accordingly a multistage filtering section is installed which, guaranteeing appropriate air speed reduction and the presence of suitable filtering materials, removes most of the dust.
The concentration rotor consists of several sections: in addition to the absorption section described above, there is a much smaller section (called regeneration) where the previously accumulated pollutant can be removed, restoring the adsorbent capacity of the zeolites.